Will these fenders clear my wheel and tire setup?

These panels are designed with clearance for factory and moderately sized aftermarket wheels. Before installation, test-fit or reference the wheel/tire diameter against the flare profile. If you're running significantly wider tires or aggressive offsets, verify clearance physically — the RBS profile is generous but not unlimited.

What prep do I need before painting?

Sand the surface with appropriate grit to promote adhesion, then clean thoroughly to remove all dust and debris. This step is critical for paint bond. After that, apply your chosen primer and topcoat system following the paint manufacturer's instructions. Proper surface prep is the foundation of a long-lasting finish.

Do I need special fasteners or adhesive to install these?

These flares use factory mounting points and standard fasteners. Confirm your OEM bolt locations before assembly, and refer to your vehicle's service manual for the correct fastener type and torque specification. No unusual hardware or epoxy is required — standard automotive-grade bolts and washers work fine.